Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyTerra Sapphire Blue Transmission Distance: 0.3
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
PLA Polyterra cotton White  Transmission Distance: 9

Swap Instructions:
Start with Charcoal Black
At layer #6 (0.56mm) swap to Sapphire Blue
At layer #9 (0.8mm) swap to Savannah Yellow
At layer #18 (1.52mm) swap to White 1.3 for the rest.