Project: dragon.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 160x160mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.5mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA Hatchbox White Transmission Distance: 10
This print uses 3 unique filaments

Swap Instructions:
Start with Charcoal Black
At layer #10 (0.88mm) swap to Scarlet Red
At layer #14 (1.2mm) swap to White for the rest.