Suspended Filament Vortex - Thick Rim by RJ Design

RJ Design

Art>Sculptures

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

Thick Rim, 0.2mm layer, 2 walls, 15% infill, Arachne

Designer

1.2 h

1 plate

4.8(16)

Boost

110

194

149

Released

Description

The Design

Here we here a Vortex made from Suspended filament.

This is the Thick Rim Version for better adhesion

The Original can be found here: https://makerworld.com/en/models/472351#profileId-384944

The cylinder is approximately 100mm in diameter

This looks great and shows off the capabilities of your Printer.

Printing

After a couple of people have had bed adhesion issues with the original, I've added this thicker rim, this should increase the surface area on the bed and increase bed adhesion.

Slice with the Arachne wall generator. ensure layer thickness is at 0.2mm

Once printed let the build plate cool. The base is fragile - take extra care when remove from the build bed.

Occasionally a filament line may fail. I recommend careful plucking it out - it won't affect the overall look.

My Work

After many years in Engineering, I've just decided to try and follow my childhood dream of becoming of a Creative Designer.

A Creative Designer of what? No idea! Right now I really like puzzles, mechanisms and kinetic sculptures so that's where I'm going to focus my efforts.

Comment & Rating (34)

@Wilsondaddy

Super impressed with how well this came out.

The designer has replied

@RJDesign

Looks great!

@cghunter42

Print Profile

Thick Rim, 0.2mm layer, 2 walls, 15% infill, Arachne

worked great! cool little print

The designer has replied

@RJDesign

Great! thanks

@henrique13pma

Boosted

incredible! this has wowed anyone that comes into my office !

The designer has replied

@RJDesign

Glad to hear it!

@Dave8781

Print Profile

Thick Rim, 0.2mm layer, 2 walls, 15% infill, Arachne

Beautiful!

The designer has replied

@RJDesign

Thanks!

@CondoreEdm

Boosted

Print Profile

Thick Rim, 0.2mm layer, 2 walls, 15% infill, Arachne

Only one failed line Thanks for the model

The designer has replied

@RJDesign

Thanks!

@chadam

Print Profile

Thick Rim, 0.2mm layer, 2 walls, 15% infill, Arachne

Had a few stings fail but it doesn't have any negative impact to the piece. Can't even tell when you look at it. Very cool design.

The designer has replied

@RJDesign

Looks good

(Edited)

@user_742354426

Print Profile

Thick Rim, 0.2mm layer, 2 walls, 15% infill, Arachne

profile worked great there was only a few loose vortex string things, but they were easy to pull off and the final product looks great .

The designer has replied

@RJDesign

Looks good!

@user_221015617

what do yom with it?

The designer has replied

@RJDesign

Hi, It's an Ornament/Art you can display it and enjoy looking at it. It's not a tool or used for anything. Out of interest, were the filaments that are broken damaged during printing or during removal? Thanks

@awillkom

Print Profile

Thick Rim, 0.2mm layer, 2 walls, 15% infill, Arachne

A few strands did fail, but as others said, you can't really notice unless looking for it. great design and print!

@baraopira

Boosted

Print Profile

Thick Rim, 0.2mm layer, 2 walls, 15% infill, Arachne

beautiful

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.