Manny (the pink one) and Jambo (the dark gray one) say hi to you.

Who could say no to two such cute baby elephants?

The size of the model is 4.7*5.9*6.9cm, for your reference.

There are three print profiles I'm offering this time.
One is single color, you can use a fine tip marker to color the eyes after printing.
The other two are 4-color print profiles, as shown in the photo, there are two different color combinations, you can choose according to your preference.

The model needs a little bit of support, no brim, if you download the model and print it yourself, please follow the picture I provided to set the support, besides the support, there are still some parts that are overhanging, I suggest to slow down the printing speed of bridge, maybe set 20 or even 10 will get better result.If you are printing with silk filament, please slow down the overall print speed to get better results.

(**A little suggestion, please clean the print plate before printing, to avoid the model not adhere to the heatbed when printing and print failure, you can also use glue if necessary.)

Finally, I hope you will enjoy and like it!