Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 145x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.2mm and the Actual Depth is 1mm

Filaments Used:
PLA Sunlu Meta Black Transmission Distance: 1
PLA Overture Light Gray Transmission Distance: 0.7
PLA Overture White Transmission Distance: 4.4
This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Light Gray
At layer #9 (0.8mm) swap to White for the rest.