Can of Whoop A$$ by dfreshkremer

dfreshkremer

Household>Office

Print Profile(4)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

0.2mm layer, 3 walls, 10% infill

Designer

2.5 h

1 plate

4.9(31)

No AMS/Supports Needed - 0.2mm layer, 4 walls, 15% infill

Designer

4 h

1 plate

5.0(3)

A Can of Whoop Ass 0.2mm layer, 3 walls, 10% infill, A1 mini

2.5 h

1 plate

5.0(5)

0.2mm layer, 3 walls, 10% infill

17.8 h

1 plate

5.0(1)

Boost

251

312

328

194

Released

Description

This Can of Whoop Ass is 72mm in diameter and 112mm tall, which is the exact size of a can of soup in my pantry. The lid will need supports, with the top of the lid facing up. Use tree supports so the threads aren't being supported (they dont need it). Also, if you can use a PETG/PLA combo for the supports, that will work best (this is how the Print profile is setup).

If anyone wants a simpler version of the lid, that doesn't require supports, just let me know in the comments, and I'll make one.

Comment & Rating (57)

@Bing_1513889863

Boosted

Print Profile

No AMS/Supports Needed - 0.2mm layer, 4 walls, 15% infill

Very easy print! Looks great in silver and scale up 1% it will fit a soda or beer can. I was able to change the letters on this picture but it was not easy.

The designer has replied

@dfreshkremer

awesome prints! I’m going to be uploading a version with no words on it, so people can add their own!

@Bing_1513889863

Boosted

Replying to @dfreshkremer :

Thanks!

@MB3DX1C

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

Lovely Print. Thank You for sharing :)

The designer has replied

@MB3DX1C

Boosted

I would also like to thank you on the tip for using either PLA or PTEG as the support layer. It's so easy to remove :)

(Edited)

@dfreshkremer

Replying to @MB3DX1C :

it’s a game changer! it’s my favorite part about the AMS

@Osprey

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

The designer has replied

@dfreshkremer

I like that filament! what type/color?!

@Osprey

Boosted

it is silver silk filament

@vf.dragon

Print Profile

0.2mm layer, 3 walls, 10% infill

Can printed fine, top printed good but I think my support settings were a bit off, was hard to remove supports. More so than usual. will tweak and reprint. Great Model!

The designer has replied

@dfreshkremer

I have a version of the lid that comes in two pieces and you glue it together, so no need for supports. give me a few hours and I’ll upload it for you.

@dfreshkremer

if you used the print profile settings that I provided, those support settings are for using an AMS with a PETG interface. That’s probably why they were hard to get off.

@vf.dragon

Replying to @dfreshkremer :

Thank for the information - will try with fresh settings

@ssweat

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

cool print

@scoutnerd2717

Print Profile

0.2mm layer, 3 walls, 10% infill

The designer has replied

@dfreshkremer

awesome! thanks for sharing! later today I’m going to upload a version of the lid that doesn’t need supports (two parts that get glued together)

@Dani36

Print Profile

0.2mm layer, 3 walls, 10% infill

@Neo_85

Boosted

everyone that sees this print. smiles or makes a comment.

The designer has replied

@dfreshkremer

I love to hear that! Thanks! Glad you like it!

@ZandeeB

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

turned out great! supports for the lid were a bit of a pain to remove but still awesome!

The designer has replied

@dfreshkremer

if you used the print profile settings, those settings are specifically for using a PETG interface.

@Eddy16

Print Profile

0.2mm layer, 3 walls, 10% infill

ottimo contenitore

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(4)

Description

Comment & Rating (57)

License

Related Models

Can lid for aluminum cans

Hueforge - Deadpool - Whoops Pose

Large, Heavy Duty Trash Bag Holder/Dispenser

330ml EU Can Dispencer