I am a big LOTR fan so I made this Wall art. It is 135*200mm

other models are available on my page!

Filaments Used:
PLA JAYO Black Transmission Distance: 0.3
PLA GREEETECH Gray Transmission Distance: 3.5
PLA Extrudr Beige Transmission Distance: 6.6
PLA Eryone Milky White Transmission Distance: 12
 

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Gray
At layer #9 (0.8mm) swap to Beige
At layer #12 (1.04mm) swap to Milky White for the rest.

To use it without AMS:

• Use the normal profile
• Slice the profile
• On the right put a pause at Layer 7, 9 and 12
• This will Trigger a manual Pause at this Layer where you can then change the filament

Made with Hueforge

Enjoy!

If you need an easy stand for the picture you can use this:

It only uses 17g filament and is printed in 37 minutes

https://makerworld.com/en/models/470314#profileId-379805