6x3 magnets - Exhaust Fan Muffler/Silencer X1/P1 Remixed by eds_3d_shop

Remixed by

eds_3d_shop

3D Printer>3D Printer Accessories

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

Eds Exhaust Muffler 6x3mm Magnets only [PLA] 0.16mm layer, 4 walls, 15% infill

Designer

3.5 h

1 plate

4.9(72)

0.16mm layer, 4 walls, 15% infill Sin torre de purga.

3.5 h

1 plate

Boost

113

253

133

383

301

Released

Description

Working on such designs takes a lot of time and if you like my work and want to support me - please print my “Designer” printprofiles! It will help me to design more! Thank you in advance!🙏

Powerfull magnetic Bambu Lab X1 / P1S (full AMS Hub compatible!) Exhaust Fan Muffler / Fan Silencer without Supports/Bridges! (Eds Version)

Looks really nice and if you don't use/need screw possibility - this is your version :-) The silencer holds securely with magnets only! (6x3mm)

⚠️ If you have other magnet sizes:

My remix of really cool original silencer of OurAngryBadger! THANK YOU for the step files!!! :-)

Main changes - really nice (with big bambu lab logo) and easy print version without supports / bridges! You can't screw it on, but it will hold only with magnets wonderfully! This version is suitable for everyone with and without AMS HUB! :-)

I changed the acoustic properties, rounded off the ventilation curve and I tested about ~5-6db average reduction of noise! Insulated with the carpet fleece ~6-7db! Cutting Templates for self-adhesive carpet fleece you can get HERE!

For magnets mounting, you will need up to 16x of 6x3mm magnets (two stacked magnets for each hole). Just glue them in the holes! (The holes are a little bit bigger - as clerance for most of magnets ;-))

If you wont to use additionally the screw option (with one SHCS m3x10mm screw), take a look on these designs Eds Exhaust Muffler with screw option and 6x3mm magnets, or Eds Exhaust Muffler with screw option and 8x3mm magnets

Print / Install Instructions:

I recommend printing with 4 walls, 6 top and bottom layers, and 0.16mm layer height on Bambu X1. You want a very solid shell so that air/noise doesn't escape as easily. PLA material is fine.
After printing, you can glue in magnets into the holes (you can use up to 16x magnets, but you don't need to fill all holes with magnets, 10 will be enough ;-)

I've been using this setup for several months and this simple mod definitely makes my X1 quieter!

I don't have any precise measuring equipment for this, but the fan noise has definitely become even more muffled for my ears - see video about on my Instagram Channel: https://www.instagram.com/reel/CmlUerEMyGf/?igshid=YmMyMTA2M2Y=

INFO from Wikipedia: “Increasing the sound pressure level by +6 dB corresponds to a doubling of the sound pressure”

Testet with “Dezibel X App” (iOS) on old iPhone

— ! —

Thanks for downloading, rating in advance and please don't forget to like this model! ;-)

Take a look at my another very helpful designs for X1/P1P/P1S/A1/A1mini:

🔗**Eds_3D_Shop designs on MakerWorld** 🔗

If you like my work and want to support me - please follow me and if you want - you can buy me a coffee! https://linktr.ee/eds_3d_shop

Thank you for your support and.. happy printing!

Ed ;-)

Comment & Rating (133)

@SimonMakerForge

Print Profile

Eds Exhaust Muffler 6x3mm Magnets only [PLA] 0.16mm layer, 4 walls, 15% infill

Super!

The designer has replied

@eds_3d_shop

Wow!!! 🤩👍 Danke für das richtig coole Make!!! Sehr sauber und die Dämmung gefällt mir richtig gut! Was ist das für Material und wo kann man das kaufen? Dankeschön und bitte auch gerne meine andere BambuLab Designs anschauen! 🙏😍👍

@SimonMakerForge

Replying to @eds_3d_shop :

Hi! the material I have used is a polypropilene foam made from NITTO manufacturer. I had some scraps of it, so I cutted it and inserted on your project. I believe you can easily find also adhesive expanded foam which will (probably increase the dB attenuation).

(Edited)

@eds_3d_shop

Replying to @SimonMakerForge :

Thanks for helpful info! 🙏😍👍

@jamesmilroy

Hi Ed, Thanks for the great model. Printed perfectly (albeit with slight lifting) in Bambu Silver and White PLA on the cool plate. My first multi-colour print since I got the printer. Templates for the felt worked a charm. As I type I have just installed the magnets and stuck on the felt. Tested for fit on my Fridge door, X1 will be next! Lifting/Warping is an ongoing problem I'm experiencing and I'm trying to get to the bottom of it, nothing whatsoever to do with your model or print profile. Your curved poop chute is next on the list.

The designer has replied

@eds_3d_shop

I’m really happy to hear that! Thank you for awesome make and feedback! About adhesion - wash your buildplate with dish-soap and warm water, dry and try it again. Chrck your Bed temperature for your build plate type.. is the right build type selected in slicer? 🖐️😃

@jamesmilroy

Replying to @eds_3d_shop :

Have tried washing already. Used the cool plate and Bambu glue stick before printing the felt templates. No problems with them but they are only 10 layers. I'll persevere however, received my new High Temperature plate today. I'm eager to try it out to see what happens. Thanks for the advice. 👍

@DKdevt

Print Profile

Eds Exhaust Muffler 6x3mm Magnets only [PLA] 0.16mm layer, 4 walls, 15% infill

Perfect print in ABS! Thanks for sharing!🤙🏻😎

The designer has replied

@eds_3d_shop

It’s really perfect! 🤩👍Thank you for your awesome rating, feedback and make! 🙏😍👍 If you like this design and want to support this - please boost this design (click on the small Rocket 🚀 or „BOOST“ button) and like it! 🙏👍 Happy printing and feel free to check my other BambuLab designs! 🖐️😃

@hyperpm

Print Profile

Eds Exhaust Muffler 6x3mm Magnets only [PLA] 0.16mm layer, 4 walls, 15% infill

Makes significant difference in noise! A bit of a long print, but worth the time.

The designer has replied

@eds_3d_shop

I’m really happy to hear and see that that! 🤩👍Thank you for awesome feedback and make! 🙏😍👍 It will greatly support my work on such designs if you will boost this design! (Klick on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Happy printing and feel free to check my another BambuLab designs! 🖐️😃

@DMTaino

Print Profile

Eds Exhaust Muffler 6x3mm Magnets only [PLA] 0.16mm layer, 4 walls, 15% infill

Printed these with IIID MAX PLA+ Black/Silver & Black/Mystic Purple. I have some sound deadening material I will be adding before installing, to see if it will help. Since it seems others are using different type of materials. ALSO BE SURE TO USE 2 MAGNETS PER HOLE!! lol <inside joke>

The designer has replied

@eds_3d_shop

I’m really happy to see that! 🤩👍Thank you for awesome feedback! 🙏😍👍 It will greatly support my work on such designs if you will boost this design! (Klick on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Happy printing and feel free to check my another BambuLab designs! 🖐️😃

@RichWoman420

Print Profile

Eds Exhaust Muffler 6x3mm Magnets only [PLA] 0.16mm layer, 4 walls, 15% infill

it’s work and fit for my X1C 🫶and I’ll print again different color pink heehe

(Edited)

The designer has replied

@eds_3d_shop

🖐️😅I’m really happy to see that! 🤩👍Thank you for awesome feedback! 🙏😍👍 It will greatly support my work on such designs if you will boost this design! (Klick on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Happy printing and feel free to check my another BambuLab designs! 🖐️😃

@SS_Stivi

Print Profile

Eds Exhaust Muffler 6x3mm Magnets only [PLA] 0.16mm layer, 4 walls, 15% infill

Preety nice design 👌

The designer has replied

@eds_3d_shop

I’m really happy to hear and to see that! 🤩👍Thank you for awesome feedback and make! 🙏😍👍 Happy printing and feel free to check my another BambuLab designs! 🖐️😃

@Xerses

Print Profile

Eds Exhaust Muffler 6x3mm Magnets only [PLA] 0.16mm layer, 4 walls, 15% infill

Very nice design, fits perfectly and was very easy to print. One modification I would like to see for the P1S, would be to add a screw connection at the top center where there is a free screw hole above the fan outlet. Thanks for making this.

The designer has replied

@eds_3d_shop

Thank you very much for your awesome feedback and make! 🙏😍👍 Happy printing and feel free to check my another BambuLab designs! 🖐️😃

(Edited)

@user_3511023713

Print Profile

Eds Exhaust Muffler 6x3mm Magnets only [PLA] 0.16mm layer, 4 walls, 15% infill

Great design works well!!! Wife is happy that it is quitter in the room. Love the magnets feature works so well.

The designer has replied

@eds_3d_shop

Thank you for awesome feedback! 🙏😍 And I’m glad to hear that WAF for your hobby is better now! I know it very well! 🖐️😅

@konx2k

Print Profile

Eds Exhaust Muffler 6x3mm Magnets only [PLA] 0.16mm layer, 4 walls, 15% infill

Looks great!

(Edited)

The designer has replied

@eds_3d_shop

Thank you for awesome make, feedback and rating ! 🙏😍👍 Happy printing and feel free to check my another BambuLab designs! 🖐️😃

This remix is based on

Bambu X1 Exhaust Muffler / Fan Silencer

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.