My first HF model. Used Stable Diffusion and a custom Lora to create a set of images, chose the best one and recreated in Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used:
    PLA BambuLab Matte Charcoal Transmission Distance: 0.6
    PLA PolyLite Jungle Green Transmission Distance: 0.5
    PLA PolyTerra Army Brown Transmission Distance: 0.3
    PLA PolyLite Lime Green Transmission Distance: 5
    PLA PolyLite White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with Charcoal
    At layer #7 (0.64mm) swap to Jungle Green
    At layer #12 (1.04mm) swap to Army Brown
    At layer #13 (1.12mm) swap to Lime Green
    At layer #16 (1.36mm) swap to White for the rest.