Photo taken by me

for stand i use: https://makerworld.com/en/models/460789#profileId-369357

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 140x186.67mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm

Filaments Used:
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA Hatchbox White Transmission Distance: 10
This print uses 3 unique filaments

Swap Instructions:
Start with Silver
At layer #6 (0.56mm) swap to Charcoal Black
At layer #10 (0.88mm) swap to White for the rest.