Rotating Rings Keyring / Toy
Copyright Claim
Rotating Rings Keyring / Toy
Boost
40
78
18
Print Profile(3)
With keychain hole - 0.12mm layer, 2 walls, 15% infill
Designer
54 min
1 plate
Mini keychain version - 0.12mm layer, 2 walls, 15% infill
Designer
23 min
1 plate
Without keychain hole - 0.12mm layer, 2 walls, 15% infill
Designer
53 min
1 plate
Boost
40
78
18
3
100
56
Released
Description
A set of rings that can be freely rotated in any direction.
Printable either as a keyring or without the loop to just play with as a toy.
Changes:
- 5 Jun 2024: Added a new print profile for a mini version with tolerances that work better than just scaling down
- 4 Jun 2024: Added raw f3d file (for some reason it appears under “Download STL” 🤷♂️)
- 30 May 2024: Made model slightly thicker to reduce chance of rings separating
- 24 May 2024: Initial version
Comment & Rating (18)
All
Boosted
Printed once in full size but it wasn't perfect. Sometimes some of the rings would pop out. Will try 70% size
The designer has replied
0
Reply
I have updated the models to make them slightly thicker which in my testing makes it much more difficult to separate the rings. Please try it out and let me know if you still have issues. Thanks!
(Edited)0
Reply
Boosted
Replying to @DanTup
Yup - that helped! Thank you. Booster you.
Been trying to get a smaller version as well. Came out working with a slow print except the middle piece. Once/if I get it right I'll upload the profile. It's just over the size of a quarter.
1
Reply
Replying to @user_90146154
Great! Thanks for the boost!
Scaling it down might cause issues because the tolerances will be smaller. I've uploaded the Fusion (f3d) file if you want to customise it there (weirdly, you have to click "Download STL" and then it shows the f3d). If you don't have Fusion, let me know what size you were aiming for and I can make a smaller version with the right tolerances and add a new profile (although it might not be until the end of the week).
0
Reply
Print Profile
With keychain hole - 0.12mm layer, 2 walls, 15% infill
It is great and it also spins!
The designer has replied
1
Reply
Thanks, glad you like it! :)
0
Reply
Boosted
Print Profile
Mini keychain version - 0.12mm layer, 2 walls, 15% infill
best profile yet!
The designer has replied
0
Reply
Thanks, glad it worked for you! :)
0
Reply
Print Profile
With keychain hole - 0.12mm layer, 2 walls, 15% infill
Grate print
0
Reply
Print Profile
With keychain hole - 0.12mm layer, 2 walls, 15% infill
funny
0
Reply
Boosted
Thanks
0
Reply
Boosted
Print Profile
With keychain hole - 0.12mm layer, 2 walls, 15% infill
0
Reply
Print Profile
With keychain hole - 0.12mm layer, 2 walls, 15% infill
0
Reply
No more
License
This user content is licensed under a
Creative Commons Public DomainRelated Models
© 2024 MakerWorld