HUEFORGE NISSAN GTR
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6

PLA Kexcelled Red Transmission Distance: 4.5
PLA Kexcelled Gray Transmission Distance: 0.8
PLA Kexcelled Natural Transmission Distance: 16

Swap Instructions: Start with Black

At layer #7 (0.64mm) swap to Red
At layer #15 (1.28mm) swap to Gray
At layer #18 (1.52mm) swap to Natural for the rest.