Squall Leonhart (FF8) - HueForge Print

Squall Leonhart (FF8) - HueForge Print

Boost
6
5
0

Print Profile(1)

All
P1P
P1S
X1
X1 Carbon
X1E
A1

0.04mm layer, 1 walls, 100% infill
0.04mm layer, 1 walls, 100% infill
Designer
4.1 h
1 plate

Boost
6
5
0
0
4
1
Released

Description

Everyone's favourite moody teen - in all his HueForge glory. Final Fantasy 8 is my favourite in the franchise, and I will be uploading more from the game in due course. Enjoy!!

 

The included 3MF file has all the necessary swaps already loaded in. You will just have to make sure your AMS/filament swaps are in the right order. As with all HueForge prints, an AMS is not neccessary at all, though it will make things easier. If you do not want to use the Bambu 3MF, you can use the STL and follow the instructions below:

 

Print Instructions:

  • Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm
  • The Model is 240.02x134.86mm in size
    You may print at higher layer heights below the Min Depth of 0.6mm

Filaments Used:

- PLA Kingroon Black Transmission Distance: 0.1
- PLA Chrominal Chestnut Brown Transmission Distance: 3.5
- PLA Chrominal Penumbra Gray Transmission Distance: 6.9
- PLA CC3D Orange Transmission Distance: 6.5
- PLA CC3D Lemon Yellow Transmission Distance: 6.8
- PLA Kingroon White Transmission Distance: 5.8


This print uses 6 unique filaments

 

Swap Instructions:

- Start with Black
- At layer #13 (0.68mm) swap to Chestnut Brown
- At layer #16 (0.8mm) swap to Penumbra Gray
- At layer #23 (1.08mm) swap to Orange
- At layer #28 (1.28mm) swap to Lemon Yellow
- At layer #31 (1.4mm) swap to White for the rest.

_________________________________________________

If you'd like my work and would like to support me, you can now subscribe to a Thangs membership plan!

 

Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.
_________________________________________________

Comment & Rating (0)

Please fill in your opinion
(0/5000)

No more