Butterfly - Clouded Sulphur - Hueforge

Our girl loves butterflys, but especially the clouded sulphur. She helped direct me on the editing and colouring of this Hueforge

The rest of my Animal Collection is here (and she helped with a few of these ones!) :

https://makerworld.com/@CanadianGamer/collections/549661

-----------------------------------

If you're looking for a commercial license to sell my prints, or to make a custom design request, please head over to my Patreon where those options are available: https://www.patreon.com/CanadianGamer3DPrintsEDM

The pictured Frame is a friction Fit design here for 200x200 Hueforges
https://makerworld.com/en/models/381229#profileId-281475

Something that Bambu has done in the last update has made hueforge designs give a floating regions error. You can ignore this error.

In my print profile I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display. This means that the layer heights listed below in my printing instructions will not match my print profile (they will be off by 3) but the mm heights will still match! Do not change the print profile to match or it will not look the same!

If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position

And if you scale it down, I have frames for 150x150 or 100x100 here:

https://makerworld.com/en/models/173529#profileId-190705

Please post a picture of your printed copy! I'd love to see it!

— Printing Instructions---

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA Generic Black Transmission Distance: 0.2
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #13 (1.04mm) swap to BambuLab Green
At layer #15 (1.28mm) swap to Yellow
At layer #21 (1.76mm) swap to Jade White for the rest.