Screwless Pokémon Card Box Remixed by hollowmaker

Remixed by

hollowmaker

Toys & Games>Other Toys & Games

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 3 walls, 15% infill

Designer

2.2 h

2 plates

5.0(4)

Boost

Released

Description

This custom-designed Pokémon card game box can be assembled without screws, using 1.75mm filament for secure interlocking of the parts. The box features a detailed Pokémon logo on the lid, which can be printed in multiple colors if using an AMS. Perfect for keeping your cards organized and easily accessible.

Also check out my other designs I have made:

Stay tuned for more innovative designs by following me. Thank you for your support!

Comment & Rating (11)

@egolgeli

Print Profile

0.2mm layer, 3 walls, 15% infill

nice box with beautiful logo. 0.20 is enough quality to enjoy the colours and details. thank you for sharing it. a question: what did you use as pin for the lid and latch hinges?

The designer has replied

@hollowmaker

Thank you for your kind words! I'm glad you like it. Regarding your question, I used filament as the pin for the lid and latch hinges. I inserted the filament into the hinge holes and then cut it to size with a pair of side cutters. This method works well to keep the parts connected securely. If you have any more questions, feel free to ask!

@egolgeli

Replying to @hollowmaker :

Smart move. I printed 2mm pins, but inserting the piece was difficult. I aimed for a snug fit to prevent the filament from falling out of the hinge. How do you ensure the filament stays in place? The hinge hole in my print is larger than 1.75mm, around 1.95-2mm.

@hollowmaker

Replying to @egolgeli :

Thank you for your feedback! The filament should not fall out under normal circumstances. However, I've had different experiences depending on the nozzle size or the printer I used to print the box. You could try bending the filament slightly before inserting it. If it still falls out, you can put a small drop of glue (not too runny) into the hole on one side to secure it.

@elviscrid

Print Profile

0.2mm layer, 3 walls, 15% infill

Came out remarkably well. It all fits together easily and is very sturdily designed. My nephew will love it for taking his swap cards with him when he goes to his friends. Thankyou.

(Edited)

The designer has replied

@hollowmaker

Hi elviscrid, thank you for sharing your print. It turned out very beautiful, and I'm sure your nephew will enjoy it! :)

@charlietuna6600

Print Profile

0.2mm layer, 3 walls, 15% infill

Came out beautiful. I made this for my best friends son so I can't wait for him to see it. Thank you for sharing your work with us!

The designer has replied

@hollowmaker

It turned out really well. I'm surprised how good the effect looks with just two colors. I'm sure the son of your best friend will enjoy it too! Thank you for sharing your print :)

(Edited)