Multiboard Bracket for Filament Storage - Dowel

Copyright Claim

Multiboard Bracket for Filament Storage - Dowel

Boost
14
28
5

Print Profile(1)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

One Pair of Brackets and all needed bolts
One Pair of Brackets and all needed bolts
Designer
5.8 h
1 plate
5.0(1)

Boost
14
28
5
0
12
4
Released

Description

A simple Bracket to add dowels or broomsticks to Multiboard. The bracket is ready and requires three large bolts - two to attach it to the Multiboard and one to attach the top and bottom sections to each other. The goal of having separate sections is that you can position this wherever you like and add the broomsticks at the end - much simpler than trying to install while already inserted.

 

Warning - Multiboard cannot handle the forces of a large dowel with 12-16kg of filaments. It will flex and deform, even if you use three brackets to distribute teh weight. At a very minimum, add offset pegs under this bracket. Ideally, use this custom bolt i designed that will allow you to rest the bolt against the wall and also to screw the bolt down against the wall, transferring the weight of your filaments to the wall and not the Multiboard tile.

Comment & Rating (5)

Please fill in your opinion
(0/5000)

what size are the holes
The designer has replied
0
Reply
25.5mm - enough for a broomstick to fit. Let me know if you need different thicknesses.
0
Reply
cool I have 25 mm dowel rods already and am converting over to multi board so that will work perfectly
1
Reply
Replying to @Deliveryhell :
Let me know if it works out!
0
Reply
Print Profile
One Pair of Brackets and all needed bolts
Gewinde etwas zu eng. Lässt sich aber einfach drucken. kann an der Rückwand angeschraubt werden
0
Reply
No more