Print at 100% infill with a layer height of 0.12mm with a base layer of 0.2mm

The Model is 100x150mm in size
You may print at higher layer heights below the Min Depth of 0.44mm
The Max Depth is 3.1mm and the Actual Depth is 3.2mm

Filaments Used:
    PLA+ Sunlu Black Transmission Distance: 0.6
    PLA Elegoo Dark Blue Transmission Distance: 3.5
    PLA Sunlu Purple Transmission Distance: 6
    PLA BambuLab Matte Sakura Pink Transmission Distance: 3
    PLA Sunlu Meta White Transmission Distance: 8
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #5 (0.68mm) swap to Dark Blue
    At layer #7 (0.92mm) swap to Purple
    At layer #15 (1.88mm) swap to Sakura Pink
    At layer #20 (2.48mm) swap to White for the rest.