for the stand i use: https://makerworld.com/en/models/460789#profileId-369357
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 180x110.53mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
PLA Hatchbox White Transmission Distance: 10
This print uses 3 unique filaments
Swap Instructions:
Start with Charcoal Black
At layer #12 (1.04mm) swap to Marine Blue
At layer #16 (1.36mm) swap to White for the rest.