Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 180x220.86mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Matte Lilac Purple Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Blue
At layer #12 (1.04mm) swap to Lilac Purple
At layer #20 (1.68mm) swap to Blue
WARNING: This Slider is at the same Layer as the Next Slider
At layer #22 (1.84mm) swap to Lilac Purple
At layer #22 (1.84mm) swap to Jade White for the rest.

If you swap purple with Blue is will be the normal colors. Have not tested on bambu, will test soon and update