Fox HueForge

This beautiful fox, staring right at the viewer through a hole at a brick wall, is one many HueForge artworks to come!

This model uses “HueForge” technic of alternating layers of filaments to create different hues and color mixes with only 4 colors!

Printing Instruchtions:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.9mm

Filaments Used:
PLA Filamentum Dark Blue Sprakles
PLA BambuLab Basic Orange
PLA Generic Yellow
PLA Ender White

Swap Instructions:
Start with Dark Blue
At layer #8 (0.72mm) swap to Orange
At layer #13 (1.12mm) swap to Yellow
At layer #17 (1.44mm) swap to White for the rest.

At the Bambu slicer, Just click the plus button on the slider thats on the right of the preview, and click change color according to these sawp intructions.

I hope you like this model!

please leave a like if you did!

HAPPY PRINTING!