Tool for holding the tool head cover during the changing of nozzles or other maintenance. Works on the left hand side of the X1 and the right hand side of the P1. Printed in PETG. Rests on the the top carbon rod, has magnets to help hold the cover in place, as well as grooved tabs.

I've tried two other hangers, but wanted a design that works with both the P1 and X1 (as I have both), and didn't hold the cover in a precarious orientation.

For PLA just change the filament in the dropdown. Does not need supports, the tabs around the top of the print have 45 degree angle to elimintate the need for supports. Turn on brim if your print bed has adhesion issues.

Requires two neodymium 8mm x 3mm round magnets.

Make sure the magnets are put in correctly (so as not to repel the cover). Insert some E6000 or other suitable glue. Put the magnets in place, and clamp with a binder clip until the glue cures.