Jet Engine Clock Multicolor

Remixed by
Copyright Claim

Jet Engine Clock Multicolor

Remixed by
Boost
15
20
5

Print Profile(1)

All
P1S
P1P
X1
X1 Carbon
X1E
A1

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
12.9 h
4 plates
5.0(1)

Boost
15
20
5
1
27
11
Released

Description

New Multicolor version of jet engine clock remixed from models by CATIAV5FTW. It has the following upgrades.

  • In this version fan and cone are mirrored to match clock movement.
  • Multicolor fan
  • Spinner can be printed in one piece instead glue the stripe
  • The nacelle and the stands can be printed in different colors, the old version was design to print with single color change.

Assembly tips:

  1. The numbers fit in an specific blade, so first find the correct place to add the clock mechanism correctly. Use the picture a reference.
  2. You may need to cut clock hands to fit insede the engine
  3. Glue the spinner to the clock the second hand, the cone has gaps in the botton to fit the hand.

For the mecanism i use this one from amazon:

https://www.amazon.es/dp/B0C4TMR43L?ref=ppx_yo2ov_dt_b_product_details&th=1

 

the model is design for these dimensions. Specially important the 22mm core.

I suppose it can be printed with single color printer spliting the stl and printing separately, but I didn't try it.

 

Note: the number 1 has a part that may has issues at printing due to a very thin section. Just remove it, the number can be glued to the fan without problem. I will try to solve as soon as possible.

Comment & Rating (5)

Please fill in your opinion
(0/5000)

pretty cool, getting the spiral cone on over the second hand is a bit tricky without bending the hand but otherwise it went pretty smooth!
0
Reply
will this work with the bambu labs clock kit?
The designer has replied
0
Reply
I'm not sure, but form images it looks like bambu kit is too short for this design. I use the clock mechamism from the description, if the hands support is less than 22mm it will not be possible to mount the clock.
0
Reply
I need to print this for my office desk 🤓
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
No more