Artwork | The Icon | 2024
Artwork | The Icon | 2024
Print Profile(1)
Description
Artwork : The Icon
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Green Transmission Distance: 2
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Green
At layer #10 (0.88mm) swap to Gray
At layer #16 (1.36mm) swap to Jade White for the rest.
Looking Holder & Stand?
Dont worry i gotcha! Here you will find normal version suitable for this model!
https://makerworld.com/en/models/134557#profileId-163687
Dont forget check my Profile Page lot of more artwork out!
https://makerworld.com/en/u/1765792726
Support Real Artists! follow and like!
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
