Wolf HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Sunlu Meta Black Transmission Distance: 1
PLA Sunlu Meta Grey Transmission Distance: 3.5
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Basic White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Grey
At layer #14 (1.2mm) swap to Silver
At layer #18 (1.52mm) swap to Jade White for the rest.

-Ariox3D-