NOTE THAT THIS FILE TAKES A LONG TIME TO SLICE JUST LET IS SLICE AND DO SOMETHING ELSE WHILE IT FINISHES! THERE ARE A LOT OF SMALL MOVEMENTS SO IT TAKES A WHILE FOR IT TO SLICE! I COULD NOT UPLOAD A PRINT PROFILE BECAUSE OF HOW LONG THE SLICE TAKES IT TIMES OUT ON MAKERWORLD SO YOU WILL NEED TO SET THE CORRECT COLOR CHANGES YOURSELF. 

1. MAKE SURE THE COLORS NEEDED ARE SHOWN IN YOUR SLICER
2. SLICE THE MODEL
3. ONCE SLICED YOU CAN GO INTO THE SLIDER ON THE RIGHT SIDE AND MOVE TO THE SPECIFIED LAYER HEIGHTS GIVEN BELOW.
4. ONCE YOU ARE AT THE LAYER HEIGHT OF THE COLOR CHANGE RIGHT CLICK THE SLIDER AND SELECT FILAMENT CHANGE
5. CHOOSE THE COLOR YOU WANT TO SWITCH TO.
6. DO THIS FOR ALL OTHER COLOR CHANGES

How to support me!

If you like my work, consider joining my Patreon where you can have a say in what I print next! Only Patreon members get to see those items and you can even sell them at a certain tier. Finally, if you’d like to learn my tips and tricks for making a hueforge start to finish I offer a coaching session to some of my patreons! Thank you for all your support!

www.patreon.com/CloudyNostalgia

Also, if you have any questions about how to print a piece of mine or if you need help troubleshooting, feel free to join my discord server where you can ask for help!

https://discord.gg/4ays78UJ

Also, I upload videos every so often showing how to videos for Hueforge. If you’d like to view here is the link:

https://www.youtube.com/channel/UCG1IDrymVjUyYng7nXrdGnw

**IMPORTANT INFORMATION**

• You cannot adjust the z scaling on any hueforge. This will mess with the coloring done and your hueforge will not come out as intended. You can however change the x and y to scale the picture. I recommend only changing by the same percentage.
• To get an accurate print as shown in the photos you MUST use the same filaments listed below. You can change brands (as long as they are similar) but keep the filament colors the same. If you use any other color, you will not get the same results as me.
• What you see in the slicer will not be how the final results will look! Hueforge takes advantage of color bleed to make the blended colors!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Purple Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 3.5

Swap Instructions:
Start with Black
At layer #16 (1.36mm) swap to Purple
At layer #22 (1.84mm) swap to Jade White for the rest.