100 piece puzzle
I made this model slightly under the 200mm x 200mm so it would fit in a puzzle tray of this dimension as it is being put together.
The Model is 198.44x198.44mm in size
You may print at higher layer heights below the Min Depth of 0.96mm
The Max Depth is 2.7mm and the Actual Depth is 2.7mm
Swap Instructions:
Start with black
At layer #19 (1.6mm) swap to grey
At layer #20 (1.68mm) swap to silver
At layer #21 (1.76mm) swap to orange
At layer #22 (1.84mm) swap to red
At layer #23 (1.92mm) swap to yellow
At layer #24 (2mm) swap to White for the rest.
Print time 11.5 hours
This is a non-commercial Hueforge Print