Battery Storage (CR2032 & CR2025) - 8 and 10 slots by The_Print

The_Print

Tools>Organizers

Print Profile(5)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

10x Batteries - 0.2mm layer, 2 walls, 15% infill

Designer

51 min

1 plate

0.16mm layer, 2 walls, 10% infill, Scarf (Smooth) seams

1.2 h

1 plate

4.7(43)

0.16mm layer, 2 walls, 10% infill, Scarf (Smooth) seams

56 min

1 plate

4.9(8)

Fine Profile, 0.12mm layer, 2 walls, 10% cross hatch infill

1.1 h

1 plate

5.0(5)

Click to see more

Boost

264

518

543

395

Released

Description

Summary

Minor redesign of jbergmans' 2032 battery storage. Can hold up to 8 batteries of types CR2032 and CR2025.

Very easy to print, small supports only needed for the inner part.

NEW: Now with a 10x coin cell battery capacity (vs the original 8x). Both are available.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

Supports:

Yes

Resolution:

0.1

Infill:

25%

Filament: Sunlu PLA+
White

Post-Printing

Just glue the inner part on the cap and that's it!

How I Designed This

Designed in SolidWorks 2020 based on the general look and images of the original part by jbergmans. Native SolidWorks files available along with STL files.

Comment & Rating (72)

@user_293698244

Print Profile

0.16mm layer, 2 walls, 10% infill, Scarf (Smooth) seams

Came right off the bed :(

The designer has replied

@andsee

I find that at some point that happens with prints and I have to clean the bed with some soap and water. Give it a good scrub with a scotch bright or something to rejuvenate. I even bought a replacement bed when my textured plate stopped adhering so well, but after a good scrub it's back to new. Hope this helps.

@The_Print

Replying to @andsee :

This, and most beds can be flipped over as there is an identical print surface on the other side.

@rogertheriault

Print Profile

0.16mm layer, 2 walls, 10% infill, Scarf (Smooth) seams

thanks, very handy. hate the packaging of these batteries it’s a pain to get a battery out!

@SalsaVerdeBTG

Print Profile

0.16mm layer, 2 walls, 10% infill, Scarf (Smooth) seams

My only gripe is I had to print two of them because I keep so many 2032s on hand. I added a simple text label as well. Nice work.

@domatrix

Boosted

Print Profile

0.16mm layer, 2 walls, 10% infill, Scarf (Smooth) seams

Great case for storing CR2032 batteries. I have added a label in the Bambu app as I also store CR2025 batteries in another case. Fits perfectly. I glued the lid on with 2-component instant adhesive for plastic. Thank you very much.

@neiviesis

Print Profile

0.16mm layer, 2 walls, 10% infill, Scarf (Smooth) seams

usefull 👍🏻

@ID_Tag

Print Profile

Fine Profile, 0.12mm layer, 2 walls, 10% cross hatch infill

works as attended

@DefMaker

Print Profile

0.16mm layer, 2 walls, 10% infill, Scarf (Smooth) seams

good

(Edited)

@user_4199985199

Print Profile

0.16mm layer, 2 walls, 10% infill, Scarf (Smooth) seams

prints perfect

@hfmy_hz

还真挺不错！

@martenh

Print Profile

0.16mm layer, 2 walls, 10% infill, Scarf (Smooth) seams

Much better than a broken half used package. But with a press fit or snaps, glue could be avoided. Advice to anyone printing - make sure the glue is really, really, dry before closing it up with batteries as the fumes will corrode them otherwise.

(Edited)