Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Geeetech Black Transmission Distance: 0.6
PLA+ Sunlu Grass Green Transmission Distance: 2.5
PLA+ Sunlu Orange Transmission Distance: 6
PLA Geeetech Yellow Transmission Distance: 14

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Grass Green
At layer #12 (1.04mm) swap to Orange
At layer #22 (1.84mm) swap to Yellow for the rest.