Modern Midcentury Birdhouse - Wifi Camera enabled

Copyright Claim

Modern Midcentury Birdhouse - Wifi Camera enabled

Boost
807
1200
71

Print Profile(1)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

0.2mm layer, 2 walls, 8% infill
0.2mm layer, 2 walls, 8% infill
Designer
26.9 h
12 plates
4.9(14)

Boost
807
1200
71
62
623
146
Released

Description

Welcome to our cozy Midcentury Modern Birdhouse!

 

It's not just a home for birds – it's a stylish retreat full of cool features like a Wifi enabled camera for birdwatching and more!

 

Around the house, you'll find cool stuff like a modern textured panel, tiny cacti, a cute wooden-effect wall, a pergola for shade and a handy tray for seeds or plants. There's even a pop of color with a fun angular piece!

 

Of course, there's a 35mm entrance and a little perch for our feathered friends.

 

But the coolest part? The roof has a big opening covered by a magnetic box that looks like a mini terrace. It's not just for looks – you can put a plant in it with the "Terrace Box" component or add a WiFi camera with the "Blink Support" part to see what the birds are up to!

 

It comes with mounts for walls or poles, so you can place it wherever you like.

 

Printing it is easy but takes a bit of time. Since it's for outdoors, use tough materials like PETG, ABS, or ASA is recommended. PLA might fade or warp in the sun.

 

You'll need screws, bolts, inserts, and magnets – check the list below for everything you need!

 

Assembling it is quite intuitive, but I have attached the complete instructions.

 

To add the Wifi camera you will need a Blink device (works with Blink Outdoor 3 or 4). You could need also the Sync Module or an Alexa device to connect the camera to.

 

I personally used these:

 

Blink Outdoor Camera 

Blink Sync Module

 

NOTE:

It's recommended not to install the birdhouse in direct sunlight, especially if equipped with the WiFi camera. Best place would be under a tree or similar.

 

Dimensions

 

The base is 25cm x 20cm. The house with terrace is tall about 19cm max.

 

Unfortunately, I've just finished and mounted the first one, so I don't have any videos of our little friends to show you yet. However, here's a peek inside with the camera:

 

Get ready to enjoy building your birdhouse and making new feathered friends!


Documentation (1)

Assembly Guide (1)
Modern Bird House Drawing_24fdb8cd-ec01-4200-8f6e-2b5aa7203b19.pdf

Bill of Materials

List other parts
For the birdhouse 2x - M3 4mm screws (available on Maker's Supply) 7x - M3 8mm screws (available on Maker's Supply) 4x - M3 Threaded Inserts (available on Maker's Supply) 8x - Magnets (4x2mm or 5x2mm) (available on Maker's Supply) For wall mount 2x - M5 12mm screws 2x - M5 nuts For pole mount 4x - M5 12mm screws 4x - M5 nuts Optional for Wifi camera: 1x Blink Outdoor Wifi camera 1x Blink Sync Module

Purchase from Bambu Store

Comment & Rating (71)

Please fill in your opinion
(0/5000)

Boosted
Print Profile
0.2mm layer, 2 walls, 8% infill
Fun build! Easy to print. Looks great and canera fits nicely.
The designer has replied
1
Reply
Love it! Thanks
0
Reply
Thanks for great Model :)
1
Reply
Boosted
Nice one, I really appreciate the design and the simplicity of the print. 🔥😎🚀
(Edited)
1
Reply
Waiting my camera. Good design
0
Reply
Where do the parts on plate 10 go? I don't see them in the assembly instructions.
The designer has replied
0
Reply
sorry they go inside the house to close unused holes for wall or pole mount
1
Reply
Replying to @michelem :
Thank you! 😃
0
Reply
I'm printing it right now. I'm excited to put it all together!
0
Reply
Great design. Could you release a modified version of the blink camera housing that is a little taller? It didn't quite fit the V4 camera. It is close enough it works but but does not shut.
The designer has replied
0
Reply
Could you share a pic or something to better understand the problem? Thank you!
0
Reply
Replying to @michelem :
ok I think I understood the problem, the v4 is 41mm tall while the v3 is 31mm, so I just need to increase the walls height of the Terrace to fit it and add the lid. I will do this today. Stay tuned.
0
Reply
I just added the STL file "Terrace for Blink v4" download and try it now it should fit. Please let me know!
2
Reply
Boosted
Which length is recommended for the m3 threaded inserts? I have some in 4, 5 and 6 mm length and wonder which I should use.
The designer has replied
1
Reply
Mine were 5.7mm so both 5 and 6 would work
0
Reply
Boosted
Replying to @michelem :
thanks michelem
0
Reply
Awesome build! Came together nicely - I used PLA so, we'll see if it can stand up to the sunlight. Within the week of it being put up we now have a pair of Carolina Wrens nesting! Going to be alot of fun checking in on them from time to time!
2
Reply
Is there any chance that you can fit it on the A1 Mini printbed? Almost all parts do fit the 18x18cm bed, but not all. Just resize would result in not fitting anymore, i guess. I'd love to print this, but are limited to the A1 Mini :(
The designer has replied
0
Reply
Well, only the roof and the base won't fit it, for the roof I could arrange something or you could simply cut it and glue, but for the base it is a problem because I can't cut off much space to fit the 18cm. I will try something but can't guarantee anything.
0
Reply
Replying to @michelem :
Thanks! Cutting and glue it together after seems to be an okay workaround! Will try and see if it works. Thanks :)
0
Reply
What brand and color did you use for the part the camera goes in? I can't find a close match. I'd like to stay as close to these colors as possible.
The designer has replied
0
Reply
If you speak about the top yellow terrace it's made by Bambu Lab ABS Tangerine Yellow https://eu.store.bambulab.com/it-it/collections/asa-abs/products/abs-filament?variant=47237300912476
0
Reply
Thank you! 😃
0
Reply