Herringbone Gearset Fidget Toy
Copyright Claim
Herringbone Gearset Fidget Toy
Boost
125
164
29
GIF
Print Profile(3)
0.2mm layer, 2 walls, 15% infill
Designer
36 min
1 plate
0.2mm layer, 2 walls, 15% infill
37 min
1 plate
A1 Mini (0.2mm layer, 2 walls, 15% infill)
40 min
1 plate
Boost
125
164
29
4
277
298
Released
Description
This is a module 0.5 herringbone fidget gearset. It's super simple to print, doesn't use very much plastic, and looks great, especially with a tri-color plastic such as is pictured.
Special thanks to 3DHoJor for donating the plastic I used to prototype this design. Here's what I used: https://amzn.to/4apABqQ
Some PLA-compatible lubricant will go a long way with this design, but is not required: https://amzn.to/4bJGtfk
Comment & Rating (29)
All
Print Profile
A1 Mini (0.2mm layer, 2 walls, 15% infill)
just gets a little stuck but moves pretty well overall. printed well on first try, just is a little tight for the inside of the gears spinning around the housing.
0
Reply
Print Profile
A1 Mini (0.2mm layer, 2 walls, 15% infill)
very fun to play with and easy to assemble.
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
It was a very fun print
0
Reply
Fun design. I did notice the gears do have a small slip from each other now and again.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
very good quality
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Really clean, tight fitting print! Added some silicone spray lubricant.
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
very nice
0
Reply
Boosted
;)
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
Gears mesh really well. Small issue for me was the cover plate Is a fairly loose fit so wouldn't stay on. (a1 mini with esun filament) this doesn't affect the function
0
Reply
License
This user content is licensed under a
Creative Commons Public DomainRelated Models
© 2024 MakerWorld