TPU JAYO preset profile Filament and Process P1S by Damiano

Damiano

3D Printer>Test Models

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 25% infill

Designer

49 min

1 plate

4.6(10)

[TPU] 0.2mm layer, 2 walls, 25% infill, A1 mini

54 min

1 plate

3.0(1)

Boost

230

244

378

118

Released

Description

Please give me a thumbs up 👍🏻 if you like this, even if you don't download this - it’ll help more people discover this model. Thanks so much !
Hi ! I made this TPU JAYO filament and process profile for my use but I want to share with You.
It's almost tuned and You can tune it as You want but it's ready for printing - no stringing and other defects.
Delete “calicat.STL” model or uncheck it from Object list, add model that You want to print and enjoy the results !
Please remember to dry TPU before printing ! (even if You opened new, not used filament)

Feel free to comment and if You like it please click “Like” button.

If You like my model You can buy me a coffee ---> https://paypal.me/DamianS0k0l

Comment & Rating (27)

@emilskibsted

Print Profile

0.2mm layer, 2 walls, 25% infill

Looks the same as with the default TPU profile imo… still has stringing. (using fully dried TPU)

The designer has replied

@Damiano

TPU profile have minor changer but Process is the most important I think 😇 Maybe you must a little tune up retraction or other filament properties like Wipe after retraction, etc. You can also lower your temperature 🙂

(Edited)

@Macheciau13

nice profile

The designer has replied

@Damiano

Thanks for your comment 😁I hope will be helpful 😇

@user_369377654

非常感谢节省了很多时间

The designer has replied

@Damiano

Thanks for your comment 😁You’re welcome 👍

@3DBOYZ

thank you so much for this!

The designer has replied

@Damiano

I’m glad you liked it 😁Happy printings 🙂

@Ralf_Frankfurt

Print Profile

0.2mm layer, 2 walls, 25% infill

Druckt gut.

The designer has replied

@Damiano

Thanks for your rating 😁

(Edited)

@user_1835781425

Print Profile

0.2mm layer, 2 walls, 25% infill

Easy print but there Is too much infill

The designer has replied

@Damiano

I tested less infill about 15% and it was not enough for that cat - solid infill sagging bad 🙄 Then I set infill for higher value and it’s perfect for me 😁 Please consider that you can change infill as you want 🙂I hope your rating will be higher next time because infill is individual case of each user 😇 Now I get it - You want to have that cat more squishy 🤭 Then yes, you have to lower your infill 😄

(Edited)