Flare gun - working prop
Copyright Claim
Flare gun - working prop
Boost
127
154
15
Print Profile(1)
0.16mm layer, 2 walls, 0.4 mm extruder
Designer
4.4 h
3 plates
Open in Bambu Studio
Boost
127
154
15
4
205
37
Released
Description
Hello everyone! This is a prop model replica of the Orion Flare Gun. The parts are very simple to both print and assemble (see image for assembly). You need 4 screws that are about 1cm high with a 2mm thick thread and a head that is 4 mm in diameter. An elastic band is also required (see image).
I hope you like it, feel free to customize it to your liking with lettering or decorations like I did (I tried to write "careful" under the barrel even if it didn't come out very well 😂)
Documentation (1)
Assembly Guide (1)
Comment & Rating (15)
All
Print Profile
0.16mm layer, 2 walls, 0.4 mm extruder
this flare gun model is awesome, printing and assembly was easy.
1
Reply
looks great 👍
The designer has replied
1
Reply
Thanks 😄
0
Reply
I've updated the print profile, you should be able to find the second handle in the third plate.
Sorry again for the inconvenience ;)
0
Reply
Boosted
Print Profile
0.16mm layer, 2 walls, 0.4 mm extruder
model requires some assembly and why would you use m2.5 screws instead of 3
The designer has replied
0
Reply
They were the only screws I had
0
Reply
Replying to @TheFranzCreator
thanks for the boost
0
Reply
Sieht echt gut aus, aber leider fehlt die Zweite Griffschale.
The designer has replied
1
Reply
You are right! I'll add it straight away, sorry for the inconvenience
0
Reply
谢谢分享，很期待成品
1
Reply
wait so does it actually shoot a flair?
The designer has replied
0
Reply
For safety reasons, the model is not designed to function as a real Flare gun
0
Reply
Print Profile
0.16mm layer, 2 walls, 0.4 mm extruder
1
Reply
Print Profile
0.16mm layer, 2 walls, 0.4 mm extruder
1
Reply
Print Profile
0.16mm layer, 2 walls, 0.4 mm extruder
1
Reply
No more
License
This user content is licensed under a
Creative Commons AttributionRelated Models
© 2024 MakerWorld