3615gregoire

cover

PXL_20240516_183555122_7c8b75e2-80cd-4d4b-bac4-242caad57e83.jpg

PXL_20240516_183903897_743a1476-b3f2-4a91-b5d8-5f0ad6b52c85.jpg

PXL_20240517_135014968_c9ddcd82-41d8-48bc-8bc2-48d330290456.jpg

plate_1.png

PXL_20240516_183555122_7c8b75e2-80cd-4d4b-bac4-242caad57e83.webp

plate_1.webp

PXL_20240516_183903897_294801a9-9e8d-419f-a837-3abe9a4520c4.webp

PXL_20240517_135014968_d49d4858-123a-4cbe-8653-1d51fac0161a.webp

Screenshot 2024-05-17 at 16.24.53_465e34cf-3136-4059-8107-58a696addee8.webp

Printed at 0.28mm, since there is no curve, lower would not make it (much) better.&nbsp; No support, no brim. very simple print.&nbsp; &nbsp;

0.28mm layer, 3 walls, 15% infill

2024-05-17_913443beca177_f785c0b8-5b42-4491-b041-e75938b2ce40.webp

This is V2, with larger opening for the USB. Printed at 0.28mm, since there is no curve, lower would not make it (much) better.&nbsp; No support, no brim. very simple print.&nbsp;

0.28mm layer, 2 walls, 15% infill

This is a case for a ESP32 microcontroler. I made it to go with the amazing <a target="_blank" href="https://www.printables.com/model/836762-prismlume" rel="nofollow noopener">PrismLume</a> project.The board press fit in the case. There is a hole for the USB power, and a hole the other side for the cable out.It uses the same inserts and screws as the <a target="_blank" href="https://www.printables.com/model/836762-prismlume" rel="nofollow noopener">PrismLume</a>:<ul><li>6x M2x4mm countersink screw [<a target="_blank" href="https://www.amazon.de/dp/B0CFXVKZDD" rel="nofollow noopener">DE</a>]</li><li>6x M2x2.5x3.2 heat nut insert [<a target="_blank" href="https://www.amazon.de/dp/B09B7F2XM3" rel="nofollow noopener">DE</a>] EDIT: Added V2 with a larger opening for the USB. (not tested)</li></ul>

ESP32 case

ASIA

Print Profile(2)

Description

Comment & Rating (4)

License

Related Models