Outlet phone holder by Moritz

Moritz

Tools>Gadgets

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 30% infill

Designer

1.6 h

1 plate

Boost

Released

Description

Description

Outlet phone holder

Should fit most cell phones and plugs.

If the hole for the plug has the wrog dimensions…write me a comment with your plug dimension and I will upload a new model.

You can extend the support area (8.5cm) for the cell phone by clicking on objects, selecting a support area and using the Scale tool (deactivate “uniform scale”) to extend the object in the Z axis direction.

If you don't need the spacers for the wall, don't print them. The spacers have a length of 1 cm (+ connector). You can also change the length with the scale tool. To do this, you must deactivate “uniform scale” and extend the spacer and the connector equally in Z axis.

You have to glue the spacers to the body!

Happy printing!

If you have suggestions for improvements write them in the comments.

Comment & Rating (2)

@Chris00001

printed out perfectly with old PLA and has potential, but tossed it out due to the slight possibly of intermittent connection/fire hazard from only having partial insertion into a wall outlet if using a wall plug without hinged blades and also weighing down that plug as well…recommend adding a hole to bolt to receptacles existing hole(s) outlet plate or redesign to replace the outlet plate altogether

(Edited)

The designer has replied

@M0ritz

Thank you for your feedback. I dont think there is a fire hazard from a partially inserted connections but a replacment for the whole outlet plate would be for sure the better solution. Maybe I will post an updated version later. Thank you for the inspiration.

No more