AMS numbering system for ams lite
Copyright Claim
AMS numbering system for ams lite
Boost
2
1
3
Print Profile(1)
0.2mm layer, 2 walls, 100% infill
Designer
14 min
1 plate
Open in Bambu Studio
Boost
2
1
3
1
3
3
Released
Description
ams lite nubering system.
print with 100% infill. only a 13 min print with 2 colours.
i was unablke to find anything with front or back on. with just numbers i was still struggling to identify which spool was which.
INSTALLATION.
once printed heat them up slightly (heat gun/blow torch/ hair dryer) then press into the location on the ams. as its slightly indented on the ams. basically your moulding the indented shape. keep pressing until cool. then simply use a bit of double sided tape.
Comment & Rating (3)
All
Boosted
Print Profile
0.2mm layer, 2 walls, 100% infill
Perfect
0
Reply
Thanks for making and uploading this. gonna print. Just top mounted my ams and was wondering if it mattered which side faced forward. Looks like it makes no difference.
The designer has replied
0
Reply
No it doesn’t really matter which way round. The wire is on one side so maybe have that side closer to the plug on the base.
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld