Easy print with AMS. Available in sizes 100x100, 150x150
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 2.2mm and the Actual Depth is 2.1mm
Filaments Used in my pictures:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA+ Sunlu White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #17 (1.44mm) swap to Ash Gray
At layer #18 (1.52mm) swap to White for the rest.