Easy print with AMS and available in sizes: 100x100, 150x150, 200x200.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

You may print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 2.2mm and the Actual Depth is 1.8mm

Filaments Used in my pics:

PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Red Transmission Distance: 6
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #14 (1.2mm) swap to Ash Gray
At layer #18 (1.52mm) swap to White for the rest.