HUEFORGE AZIMUT SEADECK 7

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Tough Cream White Transmission Distance: 10

PLA BambuLab Basic Gray Transmission Distance: 2
PETG JAYO White Transmission Distance: 6

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions: Start with Black

At layer #6 (0.56mm) swap to Cream White
At layer #12 (1.04mm) swap to Gray
At layer #16 (1.36mm) swap to White for the rest.