HUEFORGE AZIMUT S7
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Gray Transmission Distance: 2 PETG JAYO White Transmission Distance: 6
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions: Start with Black
At layer #6 (0.56mm) swap to Beige
At layer #10 (0.88mm) swap to Gray
At layer #16 (1.36mm) swap to White for the rest.