This is a modular Lab organizer which is held together by small connectors. All the models for the print time and used filament where calculated in prusa slicer with a filament densety of 1.2g/cm³. I used Elegoo filament for the configuration which costs around ≈11$ per Kilo if ts bought in a 10 kg Pack. WHD is for Width ,Height and Depth.

How it Works

You have to print some of the bins and connectors. to connect two bins with each other you will need 1 connector. The connector is slightley smaller than the hole it fits in for a more perfect fit.

Object carrier holder x24

This bin can hold up to 24 object cariers with the width of 26mm.

External size: 3x3x3 cm WHD

Print time on Normal speed: 35m24s

Used Filament: 17g

16mm Test tube x4

This model can hold 4 test tubes with a diameter of 16mm this is the normal size in labs and should fit perfectley.

External size: 3x3x3 cm WHD

Print time on Normal speed: 1h

Used Filament: 23g

Connector

This model ist the one you will need the most. its used to connect two or more bins together.

External size: 1x1x.3cm WHD

10mm Test Tubes x9

With tihis model you can hold 9 test tubes with a diameter of 10mm in place.

External size: 3x3x3 cm WHD

Print time on Normal speed: 1h 33m

Used Filament: 31g

NRM 5mm Tube x25

This model is used to hold 25 NRW 5mm tubes. Its quite thin but there will probably bee an update with higher models soon.

External size: 3x3x3 cm WHD

Print time on Normal speed: 1h45

Used Filament: 33g

Small Bin

This bin can be used to store small pills or other chemicals that are quite small.

External size: 3x3x3 cm WHD

Print time on Normal speed: 22m48s

Used Filament: 14g

Cuvette x9

For storing 9 curvettes with a with and length of 1cm this modell is perfect.

External size: 3x3x3 cm WHD

Print time on Normal speed: 57m

Used Filament: 23g

Test tube 30mm x1

This model can hold 1 30 mm Test Tube.

External size: 3x3x3 cm WHD

Print time on Normal speed: 37m18s

Used Filament: 18g

Large Bin

A large bin to store some different pipetts or wooden spatulas.

External size: 3x9x3 cm WHD

Print time on Normal speed: 56m24s

Used Filament: 35g

NRW 5mm Tubes x144

This model is used to hold 144 different NRW 5mm Tubes.

External size: 3x3x3 cm WHD

Print time on Normal speed: 7h40m12s

Used Filament: 106g