Introduction:

The idea for the planetary gearbox emerged while building a roller blind control, where the Nema 17 motor lacked the holding torque necessary to maintain the position of the blind. This need led to the exploration of planetary gears, which are typically large and bulky. To overcome this, the gearbox was designed to be as compact as possible, ensuring it could be universally installed in a variety of projects. Additionally, the design focuses on being predominantly 3D-printable, allowing for quick and accessible reproduction.

Compact Design:

This planetary gearbox is designed for space efficiency, ideal for projects with limited space. Almost all parts can be conveniently and cost-effectively produced on a standard 3D printer.

Technical Specifications:

The 4:1 gear ratio optimizes torque transmission and enhances the performance of the Nema 17 motor, making machines more efficient and powerful. The finely tuned gears ensure smooth and quiet operation, while the sturdy construction from 3D-printed materials ensures lasting reliability.

Print Settings:

• Nozzle: 0.4 mm
• Layer Height: 0.2 mm
• Infill: 15%
• Perimeter: 2/3

Additional Materials Required:

• 3x M3 nuts
• 3x M3x10 screws
• 4x M3x20 screws

Assembly Instructions:

Please refer to the images for assembly instructions.

Tip for Enhanced Performance:

For even smoother operation, you can grease the gears. This helps reduce friction and prolongs the life of the gearbox.

Customize with Ease for Your Own Project:

An f3d file for the adaptor lid is included, enabling you to print an adapter tailored to your specific project needs. The f3d is attached that you have a starting point.

Feedback and Improvements:

If you have any questions or suggestions for improvement, please feel free to get in touch. I am open to all suggestions and eager to hear your ideas on how we can enhance this design together.