Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:😁
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #14 (1.2mm) swap to Blue
At layer #28 (2.32mm) swap to Jade White for the rest.