Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.

The Model is 157.12x220mm in size. If you change size do not change z height.

Filaments Used:
PLA BambuLab Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Jade White Transmission Distance: 6
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #15 (1.28mm) swap to Blue
At layer #19 (1.6mm) swap to White for the rest.