Filament Swatch Fan Hinge model compatible with all size of Swatchinity boards (Snap-in Swatch Display Board).
1. Front board
2. Middle boards
You will need a number of spacers equal to the number of boards minus 2 (front & back).
Please note, the spacers have a raised circle unlike the optional hanging swatches.
3. Back board
In the final assembly the back board will be mounted in reverse from the others.
So be careful to install the bottom hinge swatch in a mirrored position relative to the others.
4. Optional - Hanging holes
You can optionally add hanging hole swatches on the boards. 1 per board.
5. Hinge Assembly
Choose the right hinge shaft size for the number of boards you have.
Since Bambu Lab Tough PLA has been discontinued, I have removed all those swatches (10 in total) from the color fan.
That leaves us with 70 swatches. Here is how I have sorted the remaining swatches. Of course you are free to arrange them how it pleases you
Snap-in Filament Swatch Display Board
Bambu Lab Filament Display Model
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.