Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
The Model is 200x220mm in size, if you adjust the size do not adjust the z heght.
Filaments Used:
PLA Generic Black Transmission Distance: 0.2
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6.4
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Red
At layer #13 (1.12mm) swap to Yellow
At layer #20 (1.68mm) swap to Jade White for the rest.