Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.

The Model is 142.91x200mm in size, you may adjust size but do not adjust z height.

Filaments Used:
PLA Generic Black Transmission Distance: 0.2
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #14 (1.2mm) swap to Gray
At layer #21 (1.76mm) swap to Jade White for the rest.