Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2mm

Filaments Used:

PLA BambuLab Matte Dark Red Transmission Distance: 1.5

PLA BambuLab Basic Yellow Transmission Distance: 6

PETG JAYO Black Transmission Distance: 0.3

This print uses 3 unique filaments

Swap Instructions:

Start with Dark Red

At layer #7 (0.64mm) swap to Yellow

At layer #23 (1.92mm) swap to Black for the rest.