It's a caterpillar. Get it? CAT.erpillar.

Sculpted in Nomad Sculpt, this is the first model I've made from scratch that I'm uploading to the public.

The 3MF is included with recommended print settings for users using Bambu Studio. I have included 2 versions in this model:

• Cross Hatch Scarf Seams: Use this if you're using the Beta version of Bambu studio that allows for crosshatch infill and scarf seam settings.
• Gyroid Non Scarf Seams: Use this if you're using the public release version of Bambu Studio (no scarf seams and no crosshatch infill).
• Please tweak your support settings to suit your preferences and your own printing experience. For some reason, the 3MFs do not save support interface settings, and defaults to 2 layers all the time. I usually use 0 interface layers.

If you do not use the 3MF and use the STL instead, here are my recommended print settings:

Printing recommendations:

• Layer Height: 0.16mm
• Seam position: Back, seam gap 10%, or use the contour scarf seam settings
• Walls: 3
• Top Surface: 4 layers, concentric
• Bottom: 3 layers, monotonic
• Infill: 5% Gyroid (or CrossHatch)
• Infill wall overlap: 25%
• Supports: Organic Tree supports
• Support Brim: Yes, 5mm
• Top Z Distance: 0.25mm
• Support interface layers: 0

_________________________________________________

If you'd like my work and would like to support me, you can now subscribe to a Thangs membership plan!

Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.
_________________________________________________