Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
The Model is 157.2x220mm in size, You can resize but do not adjust z height.
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Jade White Transmission Distance: 6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Red
At layer #14 (1.2mm) swap to Blue
At layer #19 (1.6mm) swap to White for the rest.