this is a modle i created for mothers day. i used 3 colors and 4 changes. i created a shadow box that i slid it into and put a fairy light in the back to make it pop just a little more.

the actual hueforge card is 110x110mm Hope you can enjoy it. i will add the shadow box as well, the lights i used were https://www.amazon.com/dp/B07MQD9PVH?ref=ppx_yo2ov_dt_b_product_details&th=1

information on hueforge and colors.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 110x110mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 1.4mm and the Actual Depth is 1.4mm

Filaments Used:
PLA Sunlu Matte White Transmission Distance: 5
PLA PolyLite Temp Purple-Pink-Translucent (Med) Transmission Distance: 10
PLA Overture Black Transmission Distance: 0.7
PLA BambuLab Basic Blue Transmission Distance: 4
This print uses 4 unique filaments

Swap Instructions:
Start with White
At layer #2 (0.24mm) swap to Temp Purple-Pink-Translucent (Med)
At layer #5 (0.48mm) swap to Black
At layer #8 (0.72mm) swap to Blue
At layer #10 (0.88mm) swap to White for the rest.